The 10kg plant protection drone is not a simple drone. It can spray crops with medicine. This feature can be said to free the hands of many farmers, because it is much easier to use UAV spraying than to use traditional methods. In addition, the 10kg plant protection drone has an excellent spraying technology principle, which makes pesticide spraying efficient and accurate.
As a representative of high-tech technology, the 10kg plant protection drone has brought a qualitative leap in China's agricultural production. However, because it is a high-tech product, it needs to be charged like our high-tech products. It is also similar to the problem that our battery will face, but the battery of the 10kg plant protection drone is not the same as ours, so how do we maintain the battery of the 10kg plant protection drone?
To maintain the battery of the plant protection drone, you need to pay attention to the following points:
The battery is not discharged: the battery voltage drops too fast, improper control will lead to over-discharge, slight damage to the battery, and severe low voltage will cause the aircraft to explode. Some pilots fly with plant protection drones with a 10-kilogram class because of the small number of batteries. It will be over-discharged, and such batteries have a very short life. I don't know that this will greatly increase the cost of use, and the corresponding strategy is to fly as little as possible. In a minute, the life cycle will fly another cycle. It is better to buy two extra batteries at a time than to push the battery beyond the capacity limit. Therefore, every pilot should use batteries in strict accordance with the drone's plant protection requirements. When the low power alert goes off, he should land as soon as possible.
Battery overcharging: Some chargers are not fully functional after the power is turned off, causing a single battery to be fully charged without stopping charging. In addition, some chargers are used for a period of time, because the components are aging, and it is easy to have a non-charging state stop problem. If the 10kg plant protection is not Overcharging of the human-machine lithium battery will affect the battery life, but it will directly explode and catch fire. Therefore, to avoid overcharging lithium batteries, the following points need attention:
a. Use charger for plant protection drone. It is best to use a dedicated lithium-ion or lithium-polymer charger for charging. The two are very close. Some chargers can be used to charge lithium polymer batteries, which will not damage the battery.
b. The second step. Accurately set the number of batteries. The display will show the battery count, so be sure to watch the charger's display carefully during the first few minutes of charging. If you're not sure, don't charge often or use a charger you're familiar with.
c. After each discharge of the 10 kg plant protection UAV, if the voltage difference of the battery pack exceeds 0.1 volts, it means that the battery is faulty and should be replaced in time.
Suzhou MANHOPE Agricultural Machinery Co., Ltd. was established in 2009. The company is located in Wuzhong District, Suzhou City, Jiangsu Province. It is a high-tech enterprise integrating R&D, design, production, sales, training and service of unmanned aerial vehicles. For more than ten years, MANHOPE products have been recognized by domestic and foreign customers for their unique design, high-quality material selection and strict inspection. In the field of agriculture, MANHOPE agricultural plant protection drones have been committed to innovations in areas such as precise spraying, high efficiency and intelligence, safety and durability, making agricultural production more intelligent. Relying on mature technology, the company has a number of product patents and technical reserves in the field of heavy-duty plant protection drones.