The Chaff kneading shreds crushing all-in-one machine (Chaff Cutter Machine)is a kind of equipment used to deal with lawn, grass and plant residues. It shreds turf, grass or other plant material through a guillotine and further subdivides and processes it through an internal filament rubbing unit. The chaff kneading and shredding all-in-one machine can process forage such as corn stalks, cotton stalks, bean oranges, wheat oranges, straw (straws of different lengths harvested by the harvester) and various grains, and can also crush corncobs for planting oyster mushrooms Friends of practical fungi can use it. The machine has small power, high output, simple structure, convenient operation, can be operated by one person, has a wide range of processing, and the raw materials are not limited by length. Ideal equipment for chickens, ducks, pigs, cattle, sheep and other poultry.
Structure and working principle:
1. The machine is composed of upper shell, lower shell, discharge port, feeding hopper, angle steel frame, hammer, cutter, etc.
2. When crushing, the thickness of the crushed material is controlled by the size of the sieve hole, and different sieves can be replaced.
3. When cutting grass alone, the screen can be pulled out.
Basic Operation:
1. Remove wooden sticks, ironware, stones and other hard objects entrained in the material when feeding;
2. According to the length of the material you need, install and debug the gear;
3. Turn on the power source, let the machine idle for a few minutes, and then feed evenly if there is no abnormality; too much will easily cause overload and stop, too little will affect the efficiency;
4. When you stop working, you should stop feeding first, then let the machine idle for two minutes, blow off the dust and weeds inside, and then shut down.
Structure and working principle:
1. The machine is composed of upper shell, lower shell, discharge port, feeding hopper, angle steel frame, hammer, cutter, etc.
2. When crushing, the thickness of the crushed material is controlled by the size of the sieve hole, and different sieves can be replaced.
3. When cutting grass alone, the screen can be pulled out.
Basic Operation:
1. Remove wooden sticks, ironware, stones and other hard objects entrained in the material when feeding;
2. According to the length of the material you need, install and debug the gear;
3. Turn on the power source, let the machine idle for a few minutes, and then feed evenly if there is no abnormality; too much will easily cause overload and stop, too little will affect the efficiency;
4. When you stop working, you should stop feeding first, then let the machine idle for two minutes, blow off the dust and weeds inside, and then shut down.
Send Message
Related Products
Model NO. MH-D-CT2371
Model NO. RH-DB01A
Model NO. RH-AS-15A
Model NO. MH-D-VS2373
